819463, HIC

Structure and roof work

	This customer had a storage room in back of the house with very low slope that was attached to the house roof.
	The storage roof  was low and in bad shape.
	Because of bad water run off, parts of house roof had rotted.
	We started with removing the storage old roof.
	Then we cut off the rotten part of the house roof.
	We increased height of the storage walls 8 inches.
	Then installed the ridge rafter giving three feet additional height to the storage room.
	Picture shows trusses being installed.
	The used Plywood sheeting to cover the roof.
	The plywood was attached to the house roof that made a nice covered space in back of the house.
	We securely braced the rafters.
	And added hurricane braces to make sure roof is perfectly secure against any strong storm.
	Plywood sheeting were covered with roofing felt.
	Then we installed the flashings.
	Covered the roof with matching  composite roofing material.
	Last part was to install the gutters.
	A nicely done new roof is in place.